360Eyes

360Eyes 1

360Eyes

Note: The camera does not support both 360Eyes and IPC360 iPhone: 360Eye S Android: 360Eyes Pro

360Eyes Instructions for Use

Device working mode - cognition and switching

Device working mode - cognition

  • Mode 1: Wireless remote connection mode.
    In this mode,support remote monitoring without distance limitation.Premise is that there is wifi and wifi can be used normally to provide network support for the camera.
  • Mode 2: No network viewing mode (In this mode, you do not need to register and log in)
    This mode does not require a WiFi network,you can choose no network to view. The working principle is that the camera sends out a WiFi hotspot, then the mobile phone connects WiFi hotspot of the camera, so that the short-distance mobile phone and the camera are directly connected to view.

Definition of red indicator light


(Please carefully understand this definition to configure the camera)

①The red indicator light flashes slowly to indicate the default factory setting status.(Hereinafter referred to as red light slow flashing state)
②The red indicator light flashes quickly to indicate the device hotspot connection status.(Hereinafter referred to as red light quick flashing state)

How to switch the indicator status

The camera defaults to(red light slow flashing state),if you want to switch to (red light quick flashing state), only need to long press the reset button for 3 seconds, if need to return (red light slow flashing state), long press the reset button again for 3 seconds, switch mode to replace back and forth.

Register and download APP

User register: Enter the login interface after installation, register and then login:
① Open 360eyes APP
② Click “Register”, fill in the registration information, complete registration
③ Enter account and password, click login, enter the main interface after login

Register and download APP

Wireless remote connection mode

This mode provides 3 ways to add (1. Wireless Mode/ 2. AP mode / 3 Wire Mode) We recommend to use the “Wireless Mode”, operation is easy; if connection failed , then select “AP mode” to connect; in the case of WiFi signal unstability . we recommend to use “wire mode” (only support the camera with LAN port)

 

Method 1:Smart wireless mode:

①Click the plus symbol “+” on the upper right corner
②Click “Camera”
③Choose “Wireless Mode”
④Confirming the red indicator light flashing slowly, if yes – next step; no – refer to 1.3
⑤Enter the WiFi password, then click “next”
⑥Waiting to configure the camera
⑦After connecting successfully, name the camera, finish the addition360Eyes 4

* If the device search fails, please repeat the above steps after restart the camera

Method 2:AP hotspot connection:

①Click the plus symbol “+” on the upper right corner
②Click “Camera”
③Choose”AP Mode”
④Confirming the red indicator light flashing quickly, if yes – next step; no – refer to 1.3
⑤Enter the WiFi password, then click “OK”
⑥Enter mobile phone WiFi settings
⑦Choose camera WiFi(WiFi name starts with IPC365)
⑧Return to APP, waiting for camera connection
⑨After connecting successfully, name the camera, finish the addition

AP hotspot connection

AP hotspot connection

Method 3: Wire mode(device with LAN port)

Confirming the red indicator light flashing slowly, if yes – next step; no – refer to 1.3
Method 3: Wire mode(device with LAN port)
①Click the plus symbol “+” on the upper right corner 

②Click “Camera” 

③Choose “Wire Mode” 

④Click “Next”.(Connect the camera to the router with a network cable as the picture shows)

⑤Click on the searched camera “Mac address” 

⑥Add the device 

⑦Waiting for camera connection
⑧After connecting successfully, name the camera, and click “OK”

360Eyes 5

360Eyes 6

No network viewing mode

Confirming the red indicator light flashing quickly, if yes – next step; no – refer to 1.3
①Click the “No Internet” button on the lower left corner of the screen
②Enter mobile phone WiFi settings
③Select camera WiFi (WiFi name starts with IPC365)
④Return to APP, connection completed

360Eyes 7

360Eyes 8